Back Flow Preventers
- brass construction
- garden hose thread inlet & outlet
- break-away set screw
- import
Backflow Preventer
- brass construction
- ASSE approved
- anti-freeze
- fits hose bibbs and sillcocks, standard hose thread
Atmospheric Backflow Preventer
- maximum inlet pressure 125 PSI
- maximum temperature 210°F
AVB-007 3/4"
AVB-010 1"
AVB-015 1-1/2"
Backflow Preventer
- dual check modle
- for low hazard applications
WATT-7-010 1" FIP
Double Check Backflow
- double check backflow preventer
- Watts 007QT series
WATT-007QT-010 1" FIP
WATT-007QT-015 1-1/2" FIP
WATT-007QT-020 2" FIP
RPZ
- Reduced Pressure Zone Backflow Preventer
- Watts 009QT Series
WATT-009QT-010 1" FIP
WATT-009QT-012 1-1/4" FIP
WATT-009QT-020 2" FIP
RPZ
- Reduced Pressure Zone Backflow Preventer
- Watts 919QT Series
WATT-919QT-012 1-1/2" FIP
Air Gap
- used to pipe a RPZ to a serwer drian
- must specify modle number
- made by Watts
Plastic Water Regulator
- compact, superior corrosion resistant for general purpose applications
- maximum inlet pressure 300 PSI
- maximum temperature 150°F
- C suffix = 0-125 PSI range
- made by Watts
Pressure Regulator
- water, no.2 fuel oil and other liquids
- maximum inlet pressure 300 PSI
- maximum temperature 140°F
- B suffix = 3-50 PSI range
- made by Watts
WATT-26A-005 1/2"
Water Pressure Reducing Valve
- comes preset at 50-lb.
- adjustable from 25-lb to 75-lb.
WPRV-010 1"
Calibrated Pressure Relief Valve
- series 530
- adjustable pressure relief range 50-175 PSI
- designed for use as protection against excessive pressure build-up in systems containing water, oil and air.
- maximum tempirature 180° F.
- made by Watts
WATT-530C-007 3/4"
T&P Valve
- temperature and presher relief valve
- 3/4" MIP inlet -- 3/4" FIP outlet
- temperature relief 210° F.
100XL-020-007 150-LB 2"LONG SHANK
100XL-125-007 125-LB RELIEF
T&P Valve
- temperature and presher relief valve
- XL modle = 8" long thermostat length
- presher relief 150-lb
- temperature relief 210° F.
- made by Watts
1,437,600 BTU STEAM
WATT-40XL-010 1" - 7" PROBE
2,134,000 BTU STEAM
Tempering Valve
- Hot water extender tempering valve
- 120°F to 160°F
- SWT modles also avalible
- for residential installations
- made by Watts
WATT-70A-T-007 3/4" FIP
- Low Temp. Moldle 100°F to 130°F
WATT-L70A-T-007 3/4" FIP
Ballcock with Thermal Expansion Relief Valve
- maximum operation temperatur 110°F
- standard heights: 10", 11½", or 12½"
- made by Watts
Automatic Air Vent
- vents air for hot or cold water distribution systems
- maximum temperatur 240°F
- maximum pressure 150 PSI
- made by Watts
Water Meter Coupling
- made of brass
- includes washer
262459 1" MIP x 1-1/4" Nut
M20-751 3/4" GASKET ONLY
