Mini-RooterTM
Gives you light
weight with a long reach
With 75 feet of 3/8" cable and a 1/3 hp
motor, the Mini-Rooter clears lines from roof-top to basement, including
kitchen, bath and laundry drains. You can do heavier work in 4" lines
when the Mini-Rooter is equipped with a 1/2" cable.
This inexpensive, light-weight machine
has lots of time saving features. For instance, you can remove the
drum in seconds for more portability or to switch to a different diameter
cable--with no mess and no lost time. A distributor tube inside the
drum allows you to feed cable in and out without chucking and releasing
the cable every few feet - so you finish quicker. An optional power
cable feed gives you better feeding and retracting control.
For small drain work, you can order your
Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, More flexible
cables. An optional Mini-Rooter dolly lets you roll the machine to
and from the job on 8" simi-pneumatic wheels.
Some Mini-Rooter safety features: A foot
pedal that uses air pressure to star and stop the machine, with no electrical
wiring between pedal and motor, a ground fault circuit interrupter, and
a high impact plastic guard covering the motor pulley.
| TOSW-MR-B
WITH 3/8" x 75' CABLE |
|
Power Cable Feed
Variable speed power cable feed attachment gives
better feeding and retracting control. Quickly adjusts for 3/8" or 1/2"
cables without the need for tools or additional parts. Swings out of the
way to make drum changing as easy as ever. Fits all Mini-Rooter models. |
SPECIFICATIONS:
Weight:
3 lbs without cable.
Dimensions:
18" deep x 12" wide x 19" high.
Drum:
Capacity of 75 ft. of 3/8" or 1/2" Flexicore
wire
rope center cable. Interral distributor
tube.
Oilite bronze and ball thrust bearings.
J-Drum:
Capacity of 50 ft. of 1/4" or 5/16" Flexicore
cable.
Dual Drum:
Capacity of 25 ft. of 1/4" or 5/16" in inner
drum.
50 ft. of 5/16" or 3/8" Flexicore cable
in outer drum.
Cutter Set:
(1) Arrow head
(1) Boring Gimlet
(1) 1/2" U-Cutter
(1) 2" Side Cutter Set
Motor:
1/3 hp, with forward-off-reverse switch,
spring-
loaded mounting for proper belt tension.
Load Speed:
165 rpm.
Belt Gard:
High impact plastic.
Power Cable Feed:
(Optional) Drives 1/2" and 3/8" cables.
Foot Pedal:
Leaves operator's hands free to control cable.
Uses air pressure, so there's no electrical
contact
between pedal and motor.
Power Cord:
10 ft. 3 wire vinyl covered with molded plug.
in-line grund fault circuit interupter.
Leather Gloves:
With reinforced palm for hand protection
and proper
slippage when guiding cable.
|
REMOVABLE DRUM
You can take the drum off the Mini-Rooter in
seconds.
J-DRUM
With a J-Drum, you're ready for small drain word
in seconds. Equipped with a collet check with tightening handle. Will hold
and Super-Vee Cable.
DUAL DRUM
Holds two small dia. cables a the same time.
For instance, you can switch from a 1/4" to a 3/8" size without removing
either one from the drum. Smaller cable is in an inner drum, while large
cable is between inner drum and drum shell. Will hold any Super-Vee Cable. |