Hand Saw
- Swift-cutting heat-treated metal blades
- Hardwood handles
TOS-51020 20" Long
TOS-51026 26" Long
Plumbers Saw
- Die cast aluminum handle
- Large comfortable grip
- flame hardened blade
- Quickly cuts PVC, ABS, wood, sheetrock, etc.
- 18" blade has 10 teeth/inch
TOS-PSH1000 Handle Only
Cable Saw
- For cutting PVC pipe
- For tight spots offerig little clearance
- faster and easier than hacksaws in close quarters
Teeny Weeny Hacksaw
- Economey frame modle
TOS-6-32-P Blade only
Hacksaw
- Economey frame modle
Douglas Hacksaw
- Rugged steel and aluminum construction
- Comfortable plastic grips
- Uses 12" blades
- Adjusts to permit blade to cut sideways or flush
Ultra Tension Hacksaw
- Heavy square tubing and die cast construction
- Stores extra blades in handle
- Blade tensioning adjustment
- Cuts flush with surface
Bi-Metal Hacksaw Blade
- used on all types of materials
- a high speed steel cutting edge welded to a tough alloy steel back produces a blade with a long cutting life and high resistance to breading.
TOS-UL1232 32-Teeth
Bi-Metal Band Saw Blade
- uBi-metal construction
- Matrix II cutting edge
- contains 8% cobalt
- 44-7/8" x 1/2" x .020"
Compass Saw Blade
- also known as a keyhole saw blade
- -- close-out item -- check for stock
Jig Saw Blades
- Bi-Metal, carbon steel construction
TOS-J11 32T x 3" Long
Scroll Reciprocating Saw Blades
- Bi-Metal, carbon steel construction
- for cutting irregular shapes and contours
Aggressor™ Reciprocating Saw Blades
- Bi-Metal electron-beam welded construction
- 8% cobalt cutting edge
- tooth hardness Rc 66-68
- cuts through wood, metal, conduit, nail embedded wood, and much more
- longer life
| 1.- | First decide on the length of saw blade you need for yur application. We recommend that the blade be about 2" more than the thickness of width of the material to be cut, to take into account the blade travel. |
| 2.- | Then refer to the cutting guide for the cross section you plan to cut and select the tooth pitch. |
|
Cutting Guide
|
||
|
Tooth Pitch
|
Inch Thick
|
Best Used for Cutting |
|
32
|
1/16" - 7/16"
|
Sheet metal and other very thin metals |
|
24
|
3/32" - 5/8"
|
Galvanized pipe and metal 18 gage and under |
|
18
|
1/8" x 7/8"
|
Pipe, conduit, tubing and channel 18 gage to 1/8" thick |
|
14
|
5/32" x 1"
|
Heavy gage metal, bar stock, angles, fiber & rubber 1/8" to 1/4" thick |
|
10/14
|
5/32" x 1-1/2"
|
Heavy gage metal, fiber & rubber 1/4" and thicker |
|
10
|
7/32" x 1-1/2"
|
Heavy gage metal, fiber & rubber 1/4" and thicker |
|
6, 5/7
|
7/32" x 2-1/2"
|
General rough in including nail embedded wood |
|
2/3
|
3/8" x 2-1/2"
|
Fastest cutting for rough-in |
Aggressor™ Reciprocating Saw Blades
- general purpose style
- 3/4" wide x .050" thick
TOS-AG214 14T X 4" Long
TOS-AG218 18T X 4" Long
TOS-AG224 24T X 4" Long
TOS-AG310 10T X 6" Long
TOS-AG314 14T X 6" Long
TOS-AG318 18T X 6" Long
TOS-AG324 24T X 6" Long
Aggressor™ Reciprocating Saw Blades
- wood cutting style
- 3/4" wide x .050 thick
TOS-AG610 10T X 6" Long
TOS-AG906 6T X 9" Long
TOS-AG1203 2/3T X 12" Long
TOS-AG1208 6T X 12" Long
Aggressor™ Reciprocating Blades
- Heavy Duty modles
- 7/8" wide and .062" thick
- demolition and rescue style
TOS-AGX1208 8T X 12" Long
RemGrit® Carbide Grit Reciprocating Saw Blades
- Tungsten carbide grit cutting edge
- Grit hardness Rc 70
- Ideal for use in plastic composites, marble, soil pipe, cast iron, tile, cement, metal lathe, and conduit
|
TOS-RG-22 3-1/2"x 1/4" Med.Scroll TOS-RG-26 8" x 5/8" Coarse |
Hole Saw Mandrel
- 1/4" round drive
- 1/2-20 thread size
- fits hole saws from 9/16" to 1-3/16"
Hole Saw Mandrel
- 3/8" hex drive
- 1/2-20 thread size
- Fits hole saws form 9/16" to 1-3/16"
Hole Saw Mandrel
- 7/16" hex drive
- 5/8-18 thread size
- fits hole saws form 1-1/4" to 6"
Hole Saw Mandrel
- 3/8" hex drive
- 5/8-18 thread size
- fits hole saws form 1-1/4" to 6"
Mandrel Adapter
- adapts 1/2-20 mandrel to 5/8-18 hole saw
Not shown
TOS-HS-SS1 MANDREL SET SCREW
TOS-HS-SS2 MANDREL SET SCREW
Mandrel Adapter
- 1/4" pilot drill for hole saws
Blu-Mol Hole Saw
- Bi-metal construction
- M-3 hish speed steel cutting edge
- 4/6 variable tooth
- 1-1/8" cutting depth
TOS-HS-512 3/4"
TOS-HS-514 7/8"
TOS-HS-516 1"
TOS-HS-518 1-1/8"
TOS-HS-520 1-1/4"
TOS-HS-522 1-3/8"
TOS-HS-548 3"
TOS-HS-572 4-1/2"
Aggressor™ Hole Saw
- Bi-metal construction
- M-3 hish speed steel cutting edge
- 4/6 variable tooth
- 1-3/4" cutting depth
TOS-HS-522 1-3/8"
TOS-HS-524 1-1/2"
TOS-HS-526 1-5/8"
TOS-HS-528 1-3/4"
TOS-HS-530 1-7/8"
TOS-HS-532 2"
TOS-HS-534 2-1/8"
TOS-HS-536 2-1/4"
TOS-HS-538 2-3/8"
TOS-HS-540 2-1/2"
TOS-HS-542 2-5/8"
TOS-HS-544 2-3/4"
TOS-HS-548 3"
TOS-HS-552 3-1/4"
TOS-HS-556 3-1/2"
TOS-HS-560 3-3/4"
TOS-HS-564 4"
TOS-HS-568 4-1/4"
TOS-HS-572 4-1/2"
TOS-HS-576 4-3/4"
TOS-HS-580 5"
TOS-HS-596 6"
Wet or Dry Diamond Blade
- combines the features of segmented and continuous rim blades
- provide smoth, chip-free cutting with long-lasting durability
- for curb and sidewalk repair, brick and patio work, door and window installation
- fits hand-held grinders, circular saws and table saws.
TOS-SB-52627 7" Dia.
Dry-Cut Diamond Blade
- for curb and sidewalk repair, brick and patio work, door and window installation
- fits hand-held grinders, circular saws and table saws.
- 5/8" Arbor Hole
- 7" modle has knock-out Arbor hole
TOS-HS-52627 7" Dia.
TOS-SB-11050 8" CHISEL TOOTH COMB.BLADE
TOS-SB-11150 8" STAND.COMBINATION BLADE
TOS-SB-11170 10" STAND.COMBINATION BLADE
TOS-SB-11550 8" RIP BLADE
TOS-SB-11750 8" CROSSCUT BLADE
TOS-SB-11840 7-1/4" PLYWOOD/PANELING BLADE
TOS-SB-11850 8" PLYWOOD/PANELING BLADE
TOS-SB-11870 10" PLYWOOD/PANELING BLADE
TOS-SB-12642 7" MASONRY ABRASIVE BLADE
TOS-SB-12742 7-1/4" METAL ABRASIVE BLADE
TOS-SB-15050 8" X 16T CARBIDE SAW BLADE
TOS-SB-15130 7-1/4" X 24T CARBIDE SAW BLADE
TOS-SB-15150 8" X 24T CARBIDE SAW BLADE
TOS-SB-15350 8" X 60T CARBIDE SAW BLADE
