Law Supply, Inc.
Web Page - Eemax Main Page
2-1/2 Gal. Heater
  • compact hot water heater for point of use applications
  • 1/2" MIP inlet and outlet
  • glass-lined tank
  • adjustable thermostat control
  • on/off switch with power indicator light
  • installed 3/4" temperature and pressure relief valve
  • 110 VAC - 1200 watts - 10.9 amps
  • 11.42" x 11.42" x 18.19" Tall
  • - PDF Specification Sheet
WHE-EMT25
4 Gal. Heater
  • compact hot water heater for point of use applications
  • 1/2" MIP inlet and outlet
  • glass-lined tank
  • adjustable thermostat control
  • on/off switch with power indicator light
  • installed 3/4" temperature and pressure relief valve
  • 110 VAC - 1200 watts - 10.9 amps
  • 12.28" x 12.28" x 21.85" Tall
  • - PDF Specification Sheet
WHE-EMT4
Single Point Moldels
  • single element non-thermostatic
  • designed for undersink handwashing installation
  • water temperature is controlled by regulating the water flow using the faucet
  • integral 0.5 GPM flow control and aerator provided
  • should be fed with cold water only
  • 3/8" O.D. compression fittings at top of unit
  • - PDF Specification Sheet
WHT-SP3512     3500-WT. 120-VT.
Single "Flow Controlled" Moldels
  • single element non-thermostatic
  • serving kitchen sinks, bar sinks, utility sinks, dual hand wash sinks and higher flow modular building applications
  • water temperature is controlled by regulating the water flow using the faucet
  • flow switch engages at 0.7-GPM
  • should be fed with cold water only
  • 5/8" O.D. compression fittings at bottom of unit
  • - PDF Specification Sheet
WHT-EX65     6500-WT. 240-VT.
WHT-EX95     9500-WT. 240-VT.
Single "Thermostatic" Moldels
  • single element - thermostatic
  • standard thermostat range 100° - 140°
  • flow switch engages at 0.7-GPM
  • for hot or cold water feed
  • 5/8" O.D. compression fittings at bottom of unit
  • - PDF Specification Sheet
WHT-EX95T     9500-WT. 240-VT.
Twin Moldels
  • double elements - 9500 watts each
  • requires No.8 wire and two twin 40-amp breakers
  • both elements are fully thermostatic
  • standard thermostat range 100° - 140°
  • flow switch engages at 0.7-GPM
  • for hot or cold water feed
  • 5/8" O.D. compression fittings at bottom of unit
  • - PDF Specification Sheet
WHT-EX190TC    19000-WT. 240-VT.
Triple Moldels
  • triple elements - 9500 watts each
  • requires No.8 wire and three twin 40-amp breakers
  • all three elements are fully thermostatic
  • standard thermostat range 100° - 140°
  • flow switch engages at 0.7-GPM
  • for hot or cold water feed
  • 3/4" NPT fittings at bottom of unit
  • - PDF Specification Sheet
WHT-EX280T2T    28500-WT. 240-VT.
Element Cartridge
  • complete element cartridge
WHP-EX410SP    3500-WT. 120-VT
WHP-EX890      6500-WT. 240-VT.
WHP-EX770      7500-WT. 240-VT.
WHP-EX630      9500-WT. 240-VT.
Not Shown
Element Tool
  • for removing element cartridge
WHT-EX145
Control Board
  • for old sytle "Flow Controlled" units
  • old style units use one EX18-Triac
WHP-EX08/120V     120-VT (3-wire)
WHP-EX101/240V    240-VT (4-wire)
Control Board
  • for new sytle "Flow Controlled" units
  • new style units use one 2-pole contactor
WHP-EX182/120       120-VT (3-wire)
WHP-EX182/240/30    240-VT (4-wire)
                     30-AMP MAXIMUM
WHP-EX182/240/40    240-VT (4-wire)
                     40-AMP MAXIMUM
Control Board
  • for old sytle "Thermostatic" units
  • old style units use two EX18-Triac
WHP-EX100/120/O    120-VT (6-wire)
WHP-EX100/240/O    240-VT (7-wire)
Control Board
  • for new sytle "Thermostatic" units
  • new style units use one EX18-Triac and one 2-pole contactor
WHP-EX100/120/N    120-VT (6-wire)
WHP-EX100/240/N    240-VT (7-wire)
Triac
  • a triac is a 3 pin, solid state, contactor
  • mounts to the side of the housing
WHP-EX18-TRIAC
   
 
TEMPERATURE RISE °F
  
 
0.5 GPM
0.75 GPM
1 GPM
1.5GPM
2 GPM
2.5 GPM
3 GPM
4 GPM
Volts
Amps
Min.
Wire
3.5 kW
48°
36°
24°
 
 
 
 
 
120
29
10
6.5 kW
89°
59°
44°
30°
22°
 
 
 
240
27
10
7.5 kW
--
68°
51°
34°
25°
20°
 
 
240
32
8
9.5 kW
--
86°
65°
43°
32°
26°
 
 
240
40
8
19 kW
--
 
130°
87°
65°
52°
43°
32°
240
40 x 2
8
28.5 kW
--
 
 
 
96°
76°
65°
47°
240
40 x 3
8
 
QUALITY FEATURES
  • On Demand Hot Water - no delay
  • Continuous Hot Water - no storage capacity to run out.
  • Reduces Installation Cost - no T&P relief valve needed (check local codes).
  • Easy Installation - only one cold water line need be brought to lavatory - integral 1/2" (5/8"-OD) compression fittings on bottom (no sweat connections).
  • Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
  • Available thermostatic control - "T" helps insure accurate outlet temperatures (±1°F).
  • Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
  • Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
  • Compact Size.
  • Reduces Calcification.
  • Field Serviceable Elements - replaceable cartridge element (1_year warranty)
  • Warranty - Full Factory Warranty - heaters are guaranteed against the failure due to leaks of "Heater Body/Element Assembly" for a period of FIVE YEARS.
  • Unit must be mounted on wall.

Home Page  |  Company Information
Last updated 06/08/2007
Law Supply, Inc. (also known as Law Plumbing Supply) 401 S. Jefferson, Magnolia, AR 71753, Phone-(870)234-1940, Fax-(870)234-3299
KEY WORDS: Wholesale, Retail, Commercial, Heavy-Duty, Residential, Emax Tankless Heaters, Eemax Tankless Heaters, Emax Tankless Water Heaters, EEmax Tankless Water Heaters, Emax Water Heaters, Eemax Water Heaters,